Box Content - Greencut TOOLS108 Manual De Instrucciones

BOX CONTENT

-
17 Bits: SL (8/10/12), T (40/45/50/55/60), PH (3/4), PZ (3/4) and HEX (7/8/10/12/14).
-
18 cups ¼": SL (4/5.5/6.5), PH (1/2), PZ (1/2), HEX (3/4/5/6) and T (8/10/15/20/25/27/30).
-
17 Hexagonal cups ½ : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30 and 32 mm.
-
13 Hexagonal cups ¼": 4, 4.5, 5 ,5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 mm.
-
8 Torx cups: E10, E11, E12, E14, E16, E18, E20 and E24 mm.
-
5 Torx cups: E4, E5, E6, E7 and E8.
-
1 cup of ½ tip holder.
-
8 Long hexagonal cups ¼: 6, 7, 8, 9, 10, 11, 12 and 13 mm.
-
5 Long hexagonal cups ½: 14, 15, 17, 19 and 22mm.
-
2 Extender ¼": 2" and 4".
-
2 Extender ½": 5" and 10".
-
2 Glasses ½ for spark plugs: 16 and 21 mm.
-
2 Articulated coupling ½ and ¼.
-
2 Ratchet wrenches ½ and ¼.
-
3 Allen wrenches: 1.5, 2 and 2.5 mm.
-
1 T" key adapter for ½.
-
1 "T" key from ¼.
-
1 Extension of ¼ with manual handle.
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
17
EN