Symmons 0368-2HSB-LHS Manual De Operaciones Y Mantenimiento página 3

Installation
1) Measure and mark drill hole
locations 30" (762 mm) apart.
Drill 5/16" (8 mm) holes into
finished wall.
2) Insert two toggle anchors (H)
into drill holes. Install mounting
hardware (G) to wall and secure
with two screws (F).
G
F
H
I
*Note: For plaster walls 1/2"
thick or less, insert toggle
tool (I) into toggle anchor (H)
to secure behind wall prior
to installing trim.
3) Attach slide bar assembly (D) to
mounting hardware (G). Secure
with set screw (E).
D
4) Install wall elbow (A) to pipe
fitting inside finished wall. Turn
clockwise to secure.
A
H
5) Attach vacuum breaker (B) to wall
elbow (A). Turn counterclockwise
to tighten.
A
1
G
E
2
B
2
3
6) Attach small end of hand shower
hose (C) to vacuum breaker (B).
Turn counterclockwise to tighten.
B
1
C
7) Attach large end of hand shower
hose (C) to hand shower wand
(not included).
C
2