Control Panel; Pushbuttons And Signals On The Electronic Control Panel - Zanotti ZN Serie Manual De Uso

8.1 Control panel on-board and rem ote (optional)
Electronic control unit: it can adjust the cold room temperature and control all the functions of the refrigerating
system.
8.2 P ushbuttons and signals on the electronic control panel
ON-BOARD VERSION
To display target set point; in
programming mode it selects a
SET
parameter or confirm an
operation
Def
To start a manual defrost
(UP): To see the max. stored
temperature; in programming
Up
mode it browses the parameter
codes or increases the displayed
value.
To see the min stored temperature;
in programming mode it browses
Down
the parameter
codes or decreases the displayed
value.
To switch the instrument off
ON/OFF
To switch on or off the coldroom
Light
light
Meaning of the led's
A number of points is located on the display whose meaning is described in the following table
REMOTE PANEL VERSION
SET
(ENTER)
UP
Down
ON/OFF
Press and release
It displays any alarm (if any)
It accesses the menu
Confirm keys
Press and release
It scrolls the menu items
It increases values
Press for at least 5 seconds
To obtain a manual defrost
Press and release
It scrolls the manu items
It decreases values
Press for at least 5 seconds
ON/OFF It switches ON/OFF the
unit
25