Party Light & Sound PARTY-STUP2 Manual De Uso página 5

EN
Problem Possible cause
1. The power cord is not connected
2. Faulty mains outlet
No sound when
power is turned on
3. No input source
4. Volume set to minimum
1. Master volume is set too high
Distorted sound
2. Damaged speaker
1. Microphone plug is not firmly inserted
No sound from
2. The microphone is not switched on
Karaoke
3. Microphone volume set to the minimum
1. Un supported file format
No sound from
2. Illegal copy
MP3 source
3. USB/TF source not properly inserted
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
Accordance with the requirements of CE standard
Recycled products can be recycled
The product is suitable for indoor use
Specification
Speaker ...................................................................................................................................... 2 x 10"/25cm
Tweeters .................................................................................................................................................2 x 3"
Max. power ............................................................................................................................................ 500W
Power supply .................................................................................................................. 220-240Vac 50/60Hz
Frequency response ......................................................................................................35Hz – 20kHz (+/-5%)
S/N ratio .................................................................................................................................................. 85dB
Bluetooth frequency range ...................................................................................................2402 – 2480MHz
Max. RF emision ................................................................................................................................1.87dBm
FM band ..................................................................................................................................... 87.5-108MHz
Input sensitivity ...................................................................................................................................750mV
Input signal ............................................................................................................................................. 1kHz
Dimensions ................................................................................................................... 350 x 310 x 1000mm
Weight ..................................................................................................................................................... 17kg
Solution
1. Connect the power cord
2. Use an outlet that receives power
3. Connect an input source
4. Set the volume to an appropriate level
1. Reduce the volume
2. Check if the speaker is damaged
1. Insert the mic firmly into the socket
2. Switch the microphone on
3. Increase the microphone volume
1. Change into MP3 format
2. Insert the USB/TF source properly
5