Troubleshooting - Virax Mini VISIOVAL Manual Del Usuario

10. Storage instructions
1- It is good practice to clean the device before any long term storage.
2- The device should be stored in a cool, dry place.

11. Troubleshooting

Problem
The camera display does not
turn on
The display turns on but does
not display the image
The display shows
unresponsive image
The battery will not hold a
charge
12. Accessories
Item
16m CABLE for Mini VISIOVAL
Locator
34
Possible cause
The battery is discharged
Faulty electronic systems
Cable connection is loose Check the cable connections
The camera head is dirty
an Error in the
processor
The battery may have
slightly discharged during
storage
Operating time depends
on the use of the LED.
The battery may
damaged.
The battery is at the end
of its service life.
Solution
Recharge the battery
Contact the Virax After-sales service
Clean the camera head
image Turn the unit off and on to reinitialise
the processor
Recharge the battery
Charge the battery more often in
case of prolonged use of the LED.
be Contact the Virax after-sales service
and replace the battery.
Contact the Virax after-sales service
and replace the battery.
Reference
294121
294130
EN