Maintenance & Cleaning; External Cleaning - Cavist 46 Manual De Usuario

Energy Saving Advice
• Do not install the appliance close to sources of heat, such as a cooker, dishwasher or radiator.
• Locate the appliance in a cool well-ventilated room and make sure that the air vents are clear.
• Try to avoid keeping the doors open for a long time, warm air will enter the cabinet and may cause a build-up
of ice as well as affecting the energy consumption. Ensure there are no obstructions preventing the doors from
closing properly.
• Ensure that the door seals are clean and there are no tears or splits.
• Do not overload the appliance ; the cooling air that circulates to keep the appliance cold gets blocked and
pockets of warm air form.
III. MAINTENANCE & CLEANING
Disconnect the appliance from the power supply before
cleaning.
Internal Cleaning
Do not pour water over the appliance.
•
The cavity should be cleaned periodically using a solution
•
of bicarbonate of soda and lukewarm water (5ml to 0.5
litre of water)
Clean the accessories separately with soap and water. Do
•
not put them in the dishwasher.
Do not use abrasive products, detergents or soaps.
•
After washing, rinse with clean water and dry carefully.
•
When you have finished cleaning reconnect the plug with
•
dry hands .

External Cleaning

Wash the outer cabinet with warm soapy water. Do NOT
•
use abrasive products.
There are sharp edges on the underside of the product so
•
care should be taken when cleaning.
Once or twice a year dust the rear of the appliance and
•
the compressor at the back of the appliance, with a brush
or vacuum cleaner, as an accumulation of dust will affect