Installing Your New Bodega43 - BODEGA B4312 Manual Del Usuario

2. Installing your new BODEGA43

Please consult the following instructions for quick installation of your new BODEGA43. This
BODEGA43 is only suitable for installation when sufficient ventilation space is provided as outlined
below.
1. Place your BODEGA43 in a place where it is not exposed to extreme hot or cold temperatures
and is free from direct sunlight. Bear in mind that there should be enough space around your
BODEGA43 to fully open the door.
2. Make sure that the chosen location has a solid, stable surface.
3. Keep at least 10cm of space at the back and at least 5cm on either side of your BODEGA43 so
that the warm air it produces can be easily recirculated.
4. Check that the power supply which you intend to connect to your BODEGA43 provides 220-
240V AC / 50Hz.
5. Connect your BODEGA43 to the mains by inserting the plug into the wall socket. Your
BODEGA43 will start working as soon as you plug in the power cable.
6. Give your BODEGA43 time to reach the desired temperature. Under normal conditions, it will
take 1 to 2 hours before your empty BODEGA43 has reached the desired temperature.
7. Store your wine bottles in your new BODEGA43. It can take between several hours and a day
or two for the bottles to reach the desired temperature.
4