Problems Using Your Bodega43 - BODEGA B4312 Manual Del Usuario

The exterior of the BODEGA43
Preparation for future use

6. Problems using your BODEGA43?

Problem Possible cause
Have you recently had a
power outage?
My BODEGA43 is
not working.
Has a fuse blown in your
home?
Have you read "The
temperature range of your
BODEGA43"?
My BODEGA43 does
not reach the
desired Is your BODEGA43 placed
temperature. near a heat source?
Is there enough space for
air circulation around your
BODEGA43?
Has the door been open
often and / or for a long
time?
Are the dust filters at the
back free from dust?
Wipe away dirt with a damp cloth. Dry immediately
after cleaning.
For stubborn dirt or periodic waxing, you can use
silicone wax.
After cleaning, replace all parts in the designated
places. Then, reset the temperature as desired
following instructions in this manual.
Solution
Check that your BODEGA43 is connected to a
fully functioning power supply.
Replace the blown fuse in your fuse board.
Check that your settings correspond to the
recommendations under "The temperature
range of your BODEGA43"
Keep the cooling elements away from heat or
direct sunlight.
Ensure that you position your BODEGA43 in a
place which allows room for air circulation with
no obstruction of the fan.
Close the door and make sure that the magnetic
strip seals the door properly. Make sure not to
open the door too frequently or for long periods
of time.
Remove the dust filters and rinse them under the
tap. Dry the dust filters well before refitting them.
8