Bosch GSA18V-083 Instrucciones De Funcionamiento página 10

Ocultar thumbs Ver también para GSA18V-083:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

reduce the risk of starting the tool accidentally.
Protection Against Deep
Discharging
The lithium ion battery is protected
against deep discharging by the
"Electronic Cell Protection (ECP)".
When the battery is empty, the tool is
switched off by means of a protective
circuit.
switch after the tool has been
automatically switched off. The battery
can be damaged.
Variable Speed Controlled
Trigger Switch
Your tool is equipped with a variable
speed controlled trigger switch. The
tool can be turned "ON" or "OFF" by
Switch Lock
Your tool is equipped with a switch lock
located above the trigger. This lever is
designed for locking the trigger in the
"OFF" position to help prevent
accidental starts and accidental battery
discharge.
To lock the trigger, press the lock ( )
FIG. 5
SWITCH
Operating Instructions
Disconnect battery pack from tool before making any assembly,
adjustments or changing accessories. Such preventive safety measures
Do not continue to
press the trigger
V RI BLE SPEED
LOCK
TRIGGER SWITCH
squeezing or releasing the trigger. The
blade plunger stroke rate can be
adjusted from the minimum to maximum
nameplate stroke rate by the pressure
you apply to the trigger. Apply more
pressure to increase the speed and
release pressure to decrease speed.
The required stroke rate is dependent
on the material and the working
conditions and can be determined by a
practical trial.
Reducing
recommended when the saw blade
engages in the material as well as when
sawing plastic and aluminum.
Built-in Led Work Light
Your tool is equipped with an LED work
light that turns on automatically when the
trigger switch is activated. When the tool
is turned off, the light turns off (Fig. 1).
side of the switch lock until it clicks
(Fig. 5).
locked position whenever the tool is
not being used.
To unlock trigger, press the unlock (
side of the switch lock until it clicks
(Fig. 6).
FIG. 6
V RI BLE SPEED
TRIGGER SWITCH
-10-
the
stroke
rate
Always move the
switch lock to the
SWITCH
LOCK
is
)

Publicidad

Tabla de contenido
loading

Tabla de contenido