Publicidad
Idiomas disponibles
Idiomas disponibles
CC 09105 C
• This product is designed only for use in habitable zones
(and not for sites constantly exposed to moisture).
• Do not install the ceiling fan in a bathroom or a site with
high moisture content.
PARTS LIST
1. Mounting bracket and canopy
2. Down Rod
3. Blade
4. Blade Arm
5. Pull-Chain
6. Motor head (fan housing with motor
assembly)
7. Lighting fixture
8. Balancing kit
9. Screws, fix bolt set, nuts and washers
(A, B, C, D, E, F).
INSTALATION
To set up this ceiling fan, you must complete the following steps:
• Step 1. Install the mounting bracket by using the screws.
• Step 2. Insert the down rod into canopy.
• Step 3. Insert the wires trough the down rod, then connect the down rod to motor head by
using down rod fix bolt set
• Step 4. Connect the blade to blade arm by using screws and washers.
• Step 5. Screw the blade assembly to motor head by using screws.
• Step 6. Insert the male jack into female socket.
• Step 7. Screw the lamp holder onto motor head by using screws on lamp holder.
• Step 8. Take out a coin screw and glass to fix the bulbs (E 27, Max 60W, 230V X3 Not included).
• Step 9. Electrical connections: Live (Black), Neutral (white), Light (blue), Earth (Yellow/Green)
• Step 10. Hang and fix the whole ceiling fan to the mounting bracket by screw from canopy.
• Step 11. Connect the pull chain to the end of switches from motor head.
11
Publicidad
