Lotus ILMFS01 Manual De Instrucciones página 12

USING THE CHRONOGRAPH
This procedure shoud be performed when the chronograph second hand do not return to the
(0) second position after the chronograph has been reset, and including after battery has been
replaced.
1. Pull the crown out to the 2nd. position.
2. Press button (A) to set the chronograph second hand to the (0) position.
3. The chronograph hands can be advanced rapidly by continuously pressing button (A).
4. Once the hands have been zeroed, reset the time and return the crown to its normal position.
*Do not return crown to normal position while chronograph second hand return to 12:00
(Zero) position.
Hand stops on the way when crown are returned to normal position and these positions are
recognized as 12:00 (zero) position.
I L M F S 0 1
20
I L M F S 0 1
USING THE CHRONOGRAPH
Chronograph
second hand
Chronograph
minute hand
Hour hand
Second hand
24 hour
hand
Button A
Minute hand
Normal crown
position
Button B
Calendar
21