Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
Control Panel
Remote Control
Stand By
Set the fan on a stable, level surface .Plug the cord into a standard electrical outlet. The power indicator
on the panel will light up.
1. ON/SPEED
Press this button to switch on the Fan. The Fan will automatically start in the medium speed.
Each time the button is pressed, the speed increases from low to medium, and then to high. The speed
indicator speed
and fan indicator
on the panel will light up and glinting as fast as the speed
increases.
2. THERMOMETER
The fan will display the room temperature when the unit is switched on.
3. TIMER
Each time the button is pressed, the time increases
from 0.5 hour to maximum 24 hours.
To switch off, keep pressing the button until"0"time is displayed.
When the Time set is finished, the appliance will be turned off.
4. MIST
Press this button switch on and off the Mist function. The icon
will light on and off respectively.
for
Low mist,
for High mist.
5. ION
Press this button to activate IONISING function. The ionizer introduces negative ions into the air that
works to purify the air in the room. The icon will light on when the function is switched on,press this
button again to switch off.
- 18 -
Publicidad
Tabla de contenido
