Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
BATTERY OPERATION
The average running time on a fully charged battery is about 4 hours.
The user has the possibility to connect an external 12V battery to the EXT DC 12V IN terminals (19) on the rear
panel of the unit. Connect the positive pole (+) to the red terminal and the negative (-) to the black terminal.
RECOMMENDATIONS FOR BATTERIES IN THE REMOTE CONTROL & MICROPHONES
This symbol indicates that used batteries should not be disposed of with household waste but deposed
correctly in accordance with your local regulations..
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. When the internal batte-
ries are not to be used, remove them to avoid damage caused by battery leakage or corrosion.
ATTENTION
Danger of explosion if battery is incorrectly placed.Only replace by the same or equivalent type.
WARNING
Do not swallow the battery. Danger of chemical burns.Keep new and old batteries out of the reach of children.
If the battery compartment doesn't close properly, stop using the product and keep it out of the reach of child-
ren.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body,
contact immediately a doctor.
VOICE PROMPT
When you switch the unit on, you will hear a vocal message. To mute this message, keep the input selector
button (9) on the rear panel pressed. "OFF" will be displayed. To activate the voice prompt, keep the button 9
pressed until ON is displayed.
You can choose the language of the voice prompt between English or Chinese. Keep the PLAY button (13)
pressed. Either L-CH or L-EN will be displayed. Press until the desired language is displayed.
DESCRIPTION OF THE FRONT PANEL
⇋
↵
1
2
3
POWER
MODE
BACK
1. POWER Led: lights up when the MP5 player is switched on via the MP5 POWER switch (20) on the rear panel
2. MODE: Switches through the different file formats on the inserted USB/TF
3. BACK: Return to the previous menu item
4. SOUND TRACK: No function
5. PREV: Go to the previous track
6. NEXT: Go to the next track
7. PLAY/PAUSE: Press to start playing a track; Press again to pause playback; Press again to resume playback
8. MENU: While playing a music file, press this button to display various controls instead of the default equa-
lizer screen. Cycle through the menu items via the and buttons on the remote control or on the front
panel.
Select an item via the PLAY/PAUSE button. When the EQ item is activated, press PLAY/PAUSE and cycle
through the various music styles by pressing the PLAY/PAUSE button. You have the choice between Normal
– Rock Classic – Jazz – Pop
In MOVIE mode, this button will give you access to several audio and video settings.
9. IR: Infrared sensor. Direct the remote control towards this sensor
10. TF card input
11. USB stick input
DESCRIPTION OF THE REAR PANEL
1. Master volume control
2. Microphone volume control
3. Echo control for the microphone
4. Wired Microphone input
5. Audio output: Connect to another active box or amplifier
4
5
6
SOUND
PREV
NEXT
PLAY
TRACK
PAUSE
▶
7
8
9
MENU
IR
10
11
USB
TF
3
3
Publicidad
Tabla de contenido
