Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6. Bass & Treble controls
7. Video output via RCA: Connect to a suitable monitor
8. AUX input via 3.5mm mini stereo jack
9. Input selector: Press this button to switch between the various inputs
(AUX, USB, TF, Bluetooth)
10. REC button: Press this button to record the sound of the wired or
wireless mic on the USB or TF.
11. REPEAT: Press to toggle between repeating the current track or re-
peating all tracks.
Keep pressed during 5 seconds to activate/deactivate the talkover
function (mic priority)
12. Press to go back to the previous track.
13. Play/pause
14. Press to go to the next track
15. USB stick input (MP3)
16. TF card input (MP3)
17. ON/OFF switch of the system
18. Mains adaptor input
19. External battery input
20. MP5 power switch: Switch on the Karaoke display and module on the
front panel
INSTALLING THE BATTERIES
Remove the battery cover from the back of the remote control as shown and
insert 2x AAA size batteries ensuring correct polarity
DESCRIPTION OF THE REMOTE CONTROL
1. MUTE: Mutes the sound output
2. Switches through the different file formats on the USB/TF
3. REC: Press to record your voice
4. REC PLAY: Press to play your record
5. Increase the volume
6. Select previous file
7. Play/Pause/Select
8. Select next file
9. Reduce the volume
10. Repeat tracks / random play
11. Equalizer: Cycles through the various music styles: Normal – Rock – Classic – Jazz – Pop
12. Number buttons for direct input of a file number. Press the number of the file to access it
directly. For files numbers above 9, press 1+ the unit. Ex. For file number 15, press 1 + 5.
For file number 38, press 3+8
CONNECTION OF A WIRED MICROPHONE (NOT INCLUDED)
Connect the microphone to the MIC IN socket and switch it on. Note: If you are playing music
from any other input, connecting the microphone will not mute the sound output. Adjust the
volume, echo, bass and treble with the controls 2 (volume), 3 (echo) and 6 (bass & treble)
USING THE WIRELESS MICROPHONES
•
Open the battery compartment and insert two AA batteries with the correct polarity.
•
Turn the switch on the mic to ON. If the power indicator lamp doesn't flash or doesn't light up, check if the
batteries have been properly inserted.
•
Start singing into the microphone and adjust the volume to the desired level via the mic volume control (2) on
the rear panel.
•
Adjust the echo (3), bass (6) and treble (6) via the controls on the rear panel
•
When the indicator lamp on the mic lights up, you have to replace the battery.
•
Don't use the microphones close to the speaker in order to avoid feedback.
4 4
EN
7
8
9 10 11 12 13 14
16
15
5 5
2
3
6
6
1
20
19
18
17
4
4
1
MUTE
2
3
5
REC
REC
PLAY
VOL+
6
SCAN
7
VOL-
9
10
11
12
4
8
Publicidad
Tabla de contenido
