To Check The Channel Settings Of Each Cluster - Visiosat VISIOdata Manual De Usuario

To check the channel settings of each cluster :

- Turn the rotary button to select Select Filter.
- Push the rotary button to enter the selected mode.
- Turn the button to choose the cluster to be checked.
- The display shows the channels which have been set.
Examples :
- Push the button to exit.
Select Filter
The LED is GREEN.
Select Filter
The LED is now RED colored.
Cluster is parked.
Cluster is set to channel 22.
Select Filter
The LED is GREEN.
27
1 2 3 4 5 6 7 8 9 10
UHF Clusters
Blinking 22 and 26:
cluster is set from 22 to 26.