Copy Function - Visiosat VISIOdata Manual De Usuario

Copy function

This function allows to transmit all settings from one unit to another unit.
All actions have to be done on the SLAVE unit.
The MASTER unit remains in Stand-by.
B I-II B III
GND
47-108 MHz 174-240 MHz
G: 35 dB G: 40 dB
Att. 20 dB Att. 20 dB
Station terrestre programmable
Digital terrestrial head end
Canal de départ
Start channel
Sélection entrée
Select filter
Répartition UHF
Split UHF
+
18V 800 mA
REF : 0 144330
- Connect master and slave unit with a DSUB9 male/male crossed cable.
- Then connect mains to the units.
- Push on the rotary button for more than 3 seconds to enter into programming mode.
- Turn the button to select the Data Import mode.
- Push the rotary button to enter the selected mode.
- Push the rotary button to confirm Data Import.
Note :
If a problem occurs during data transmission the display will show an error message :
Possible causes are : wrong type of cable, no cable, bad pin contacts...
24V 24V 24V 24V
VHF-UHF UHF1 UHF2 UHF3
1 2 3 4 5 6 7 8 9 10
Amplificateurs sélectifs UHF / UHF Clusters
47-240 + 470-862 MHz 470-862 MHz 470-862 MHz 470-862 MHz
G: 40 dB G: 55 dB G: 55 dB G: 55 dB
Att. 20 dB Att. 30 dB
Att. 30 dB Att. 30 dB
Canal de fin Gain manuel
Stop channel Manual level
Gain auto
Auto level
Entrée DATA
DATA Import
Quitter
Exit
Sortie / Output
Test
18V 800 mA
(-30 dB)
SLAVE
B I-II B III
GND
47-108 MHz 174-240 MHz
G: 35 dB G: 40 dB
Att. 20 dB Att. 20 dB
Station terrestre programmable
Canal de départ
Start channel
Sélection entrée
Select filter
Répartition UHF
Split UHF
+
18V 800 mA
REF : 0 144330
Data
The software version is displayed,
followed by a dot.
3sec.
Data Import
The LED is green.
Data Import
The LED is now RED colored.
AL is displayed
A dot is displayed.
32
24V 24V 24V 24V
VHF-UHF UHF1 UHF2 UHF3
1 2 3 4 5 6 7 8 9 10
Amplificateurs sélectifs UHF / UHF Clusters
47-240 + 470-862 MHz 470-862 MHz 470-862 MHz 470-862 MHz
G: 40 dB G: 55 dB G: 55 dB G: 55 dB
Att. 20 dB Att. 30 dB Att. 30 dB Att. 30 dB
Digital terrestrial head end
Canal de fin Gain manuel
Stop channel Manual level
Gain auto
Auto level
Entrée DATA
DATA Import
Quitter
Exit
Sortie / Output
Test
18V 800 mA
(-30 dB)
MASTER