Manual Level Setting - Visiosat VISIOdata Manual De Usuario

Manually level setting
To set manually the level.
- Select the desired input or cluster.
- Turn the button to choose the Select Filter mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select BI-II.
- Push the button to confirm.
- Turn the button to select the Manual Level mode.
- Push the rotary button to enter the selected mode.
- Turn the button to set manually the level, variable from 20 dB to 0 dB (30 dB to 0 dB for clusters).
- Push the button to confirm.
Example : setting the level of BI-II.
Select Filter
Select Filter
I-II
LED is activated
Select Filter
Manual Level
Manual Level
Displayed
value
30
20
10
* Gain value with general attenuator set at 10 dB (see p. 29).
** 20 dB input amplifier ON (see p. 31)
Manual Level
Repeat this section to set all levels
30
The LED is green.
The LED is now RED colored.
III VHF-UHF 1 2 3 4 5
UHF Clusters
The LED is green.
The LED is green.
The LED is now RED colored.
Gain*
BI-FM BIII V-U
- - -
35 dB 40 dB 40 dB
25 dB 30 dB 30 dB
0 15 dB 20 dB 20 dB
The LED is green.
6 7 8 9 10
UHF1/2/3**
55 dB
45 dB
35 dB
25 dB