Pizza Function - Breville BOV900 Serie Manual De Instrucciones

PIZZA FUNCTION

The PIZZA function melts and browns cheese
and toppings, while crisping up the pizza crust.
1. Insert the wire rack into rack position 7.
2. Close the oven door.
3. Turn the SELECT/CONFIRM dial until
the indicator on the LCD screen reaches
the PIZZA function. The top figure on the
LCD screen indicates the preset PIZZA
temperature of '375°F', while the bottom
figure indicates the preset time of '20:00
MIN/SEC'. The preset CONVECTION and
FROZEN settings will also be displayed.
4. The pizza temperature, time, convection,
and frozen settings can be adjusted before
or during the cycle.
a) The pizza temperature is displayed as
the top figure on the LCD screen. Turn
the TEMPERATURE dial to adjust the
temperature from 120°F/50°C to a
maximum of 480°F/250°C.
b) Turn the TIME dial to select the cooking
time. Maximum cooking times can be set
as follows:
120°F/50°C – 480°F/250°C
20
5. Press the START/STOP button to activate
6. Once the oven has reached the set
7. Place food, positioned on the included pizza
8. After the PREHEATING alert has sounded,
9. At the end of the PIZZA cycle, the oven
If using the included pizza pan, place it in
the oven during the preheating cycle for
the best result. Carefully place pizza on the
heated pizza pan.
up to 1:00 HR
the PIZZA function. The button backlight
will illuminate red, the oven alert will sound
and the LCD screen will illuminate orange.
The LCD screen will indicate a blinking
'PREHEATING'.
temperature, the temperature alert will
sound.
pan if using, on the center of the wire rack
so air will flow around all sides of the food.
Close the oven door.
the timer will automatically begin to count
down. The temperature and time can be
adjusted during the PIZZA cycle by turning
the corresponding TEMPERATURE and
TIME dial. The cycle can be stopped at any
time by pressing the START/STOP button.
PRESS
alert will sound. The START/STOP button
backlight will go out and the LCD screen
will illuminate white.
NOTE