Technical Data - Rockwell RK7241S Manual De Instrucciones

Jobsite table saw with laser
sYMbols
To reduce the risk of injury, user must read
instruction manual
Warning
double insulation
Wear dust mask
Wear eye protection
Wear ear protection
14

teChNiCal Data

Voltage
amps
No load speed
blade diameter
Table size
Right rip capacity
Left rip capacity
Max cutting depth at 90°
Max cutting depth at 45°
blade bevel range
Protection class
Weight
Maximum radiant power
oPeratiNG iNstruCtioNs
Note: before using the tool, read the
instruction book carefully.
tools NeeDeD
The following tools are not included but may be needed
for making adjustments:
1. Phillips screwdriver
2. flathead screwdriver
3. Combination square
4. framing square
asseMblY
1. uNPaCKiNG
warNiNG: To avoid injury from unexpected
starting or electrical shock during unpacking and
setting up, do not plug the power cord into a source of
power. This cord must remain unplugged whenever you
are working on the table saw.
separate all parts from packing materials and check
each one with the illustration and the list of Loose Parts
to make certain all items are accounted for before
discarding any packing material.
if any parts are missing, do not attempt to assemble the
table saw, plug in the power cord or turn the switch on
until the missing parts are obtained and are installed
correctly.
iMPortaNt:
before operating the shipping protection for the
eNG
120 V~60 hz
15 a
4800 rpm
10˝
28 1/2˝ x 19˝
30˝
11˝
3 9/16˝
2 9/16˝
0- 45°
/ ii
73.7 lbs
‹1mW