Ordering Instructions - CM Lodestar Manual De Funcionamiento, Mantenimiento Y Piezas

WINDMILL SPECIFIC INFORMATION
To Reduce the Risk of Electric Shock or Injury, Use Indoors Only.
Using "Commercial" or other manufacturer's parts to repair the CM
Lodestar Hoists may cause load loss.
TO AVOID INJURY:
Use only CM supplied replacement parts. Parts may look alike but
CM parts are made of specific materials or processed to achieve
specific properties.

ORDERING INSTRUCTIONS

The following information must accompany all correspondence
orders for replacement parts:
1. Hoist Model Number from identification plate.
2. Serial number of the hoist stamped below identification plate.
3. Voltage, phase, hertz from the identification plate.
4. Length of lift.
5. Part number of part from parts list.
6. Number of parts required.
7. Part name from parts list.
NOTE: When ordering replacement parts, it is recommended
that consideration be given to the need for also ordering such
items as gaskets, fasteners, insulators, etc. These items may
be damaged or lost during disassembly or just unfit for future
use because of deterioration from age or service.
CM HOIST PARTS AND SERVICES
ARE AVAILABLE IN THE UNITED
STATES AND IN CANADA
Parts for your hoist are available from your local authorized repair
station. For the name of the nearest parts or service center, visit
our web site www.cmworks.com or call our customer service
department at 1-800-888-0985.
NOTE: FOR RADIO SPECIFIC
INFORMATION REFER TO:
Manual #: 191-00512-3200 R0
Included with your unit.
OR
Telephone: 1.800.288.8178
Website: www.magnetek.com
e-mail: mhcustomerservice@magnetek.com
1
(ENGLISH)
P/N: 83874-Sub1 Rev AB November 2016