Technical Data - HAEGER Styler HC-010.008A Instrucciones De Uso

English
– If necessary, the housing may be wiped with a dry, lint-free cloth.
Trimming comb and trimming blade
– After each use, use the cleaning brush to remove the hair between the trimming
comb and the trimming blade.
– The trimming comb and trimming blade can be removed for occasional
thorough cleaning by loosening the fixing screws.
– During re-assembly, the trimming comb must be precisely aligned with the
trimming blade. Take extreme care that the trimming blade does not protrude
over the trimming comb. With the adjustment lever set to its minimum cutting
length, the distance between the tips of the trimming blade and the trimming
comb should be at least 1 mm.
– After cleaning, and after the appliance has been used for approx. 10 minutes,
put a few drops of lubricating oil between the trimming comb and the trimming
blade and then switch the appliance briefly on to ensure that the oil is well and
evenly distributed. Regular oiling will guarantee good cutting performance over
a long period and thus a long service life.
– When the appliance is not in use, put the blade shield over the trimming comb.

Technical Data

Model:
Power supply
Protection Class
Rated power
Rated Operating time:
For home use only
6
HC-010.008A
230V~, 50Hz
II
10W
10 min
Instructions for use