Connection; Connection Box Edc-Aks, Art. No. 745 - Eneo EDC-AKS1 Instrucciones De Manejo

4 Connection

4.1 Connection Box EDC-AKS1, Art. No. 74125
not connected
CON4: for one heater and one fan with 4VAC
CON3, CON5, CON6, CON7: to the dome camera
CON2: for external connectiion
CON8: for AC line connection (30VAC)
CAUTION: Power input cable uses suitable product to National Requirement be outdoor.
Minimum conductor size: 0,75mm
NOTE: To male connections on the Connector Strip, press and hold the button and insert the wire in the
hole below the button. After releasing the button, tug gently on the wire to make certain it is
connected. To disconnect a wire, press and hold the button above the wire and pull out the wire.
NOTE: Place the BNC connector at the safe position not to make a short circuit.
, 18AWG
2
7
Input AC Line