SURFOX Stainless steel passivation tester
8. SURFOX passivation tester software
SURFOX passivation tester can be connected to a PC with USB cable, allowing
the download of recorded data.
Before connecting the external unit to the computer, install the software supplied.
8.1 Software installation
Insert the supplied CD in the computer. The installation will automatically begin
through the AutoRun function. If this feature is disabled, simply open the folder
contained on the CD and click on the file "Installer".
Follow the onscreen instructions.
After installation, the software will start automatically, confirming the proper
installation.
NOTE: in some cases (with Windows 7) a message may appear mentioning
to keep the installation as performed or reinstall according to the Windows
settings.
Select "This program installed correctly".
8.2 Hardware installation
Connect the external unit to the USB port of the computer using the USB cable
supplied.
The tester will automatically turn on and driver installation will start.
To download the data from the hardware click on the Test button in the program
installed on the computer.
12