Bosch GAS20-17A Instrucciones De Funcionamiento página 12

2610051564_GAS20-17A 5/8/18 1:18 PM Page 12
safety measures reduce the risk of starting the tool accidentally.
▶ Switching Dust Extractor
On/Off
Switching the Unit On: Set mode
selector switch 5 to on "ON" or
"ON+AFC" (Fig. 4). See "Filter
Cleaning System" chapter for more
information.
Switching the Unit Off: Set mode
selector switch 5 to "OFF".
After completing an application (e.g.
drilling in concrete), it is necessary to
continue running the dust extractor
for 10-15 seconds to clear the dust
from the hose into the dust extractor.
▶ Connecting Dust Extractor To
Power Tools And
Attachments
This dust extractor can also be
connected to various power tools or
their attachments to easily extract
and collect dust. Applications include
drilling and demolition of concrete
using rotary and demolition hammers,
as well as sanding various materials
using grinders and sanders. Other
power tools that can be connected to
the dust extractor include routers,
planers and saws. To determine if any
attachment
required to connect a given power
tool and dust extractor hose, consult
the Bosch catalog or website
(www.boschtools.com). Depending
on the hose port on the power tool or
attachment, the included VX120
power tool hose adapter can be either
slid into the hose port or snapped
into place (Fig 4). Bosch also offers a
variety of other dust extractor hose
adapters (not included) to allow the
hose to be connected to hose ports of
various sizes (See page 18).
When using the Y-connector, you can
attach up to 2 hoses (one in each
port) so that multiple tools can be
used in their
applications. If using only one tool with
Y-connector, close the vacant sleeve
with attached plug.
Operating Instructions
Disconnect the plug from the power source before making any
assembly, adjustments or changing attachments. Such preventive
and/or adapter
dust extraction
Fig. 4
tion on Silica Dust to ensure you have
the correct CFM for the application.
▶ Removing And Replacing
Filter
A. Pull the locking latch 15 for the
filter cover and open cover 7. When
is
cover is fully open, it will click into
place (Fig. 5).
Fig. 5
12
5
Refer to Table 1 of
the OSHA Regula -
15
7
24
1