Scope Of Delivery; Technical Details; Intended Use; Safety Notice - Crivit SL-2117 Instrucciones De Uso

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following instructions for use. Use the product
only as described and only for the given areas
of application. Keep these instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.
Scope of Delivery (fig. A)
(1) main frame 1x
(2) footrest frame 1x
(3) sunroof 1x
(4) wheels 2x
(5) rod 2x
(6) screw long 2x
(7) screw short 2x
(8) washer 2x
(9) cap nut 2x
(10) pin 2x
(11) spanner 1x
Instructions for use 1x

Technical Details

Weight: approx. 4.3kg
Dimensions: approx. 147 x 67 x 58cm
(L x W x H)
Max. load: 100kg
Max. loading capacity when used as a transport
aid: 20kg

Intended Use

The article is not designed for commercial use.
The article is intended for use in the leisure and
camping sector (outdoor area).

Safety Notice

WARNING!
• Danger of suffocation for children!
• Never allow children to play with packaging
materials when unsupervised.
Danger of Injury!
• Do not place loads that exceed 100kg on the
article.
• Check the article before initial use for dam-
age or signs of wear and tear. Make sure that
all connecting elements are sufficiently tighten-
ed. The article may only be used when in
perfect condition!
• Tighten each individual screw before using
the article.
• Place the article only on solid, even ground.
• Risk of injury if article is incorrectly assem-
bled!
Danger of Bruised Fingers!
• The article may only be erected by
adults. Take care not to trap your fingers
when folding and unfolding the article.
Caution!
• Always supervise your children. The article is
not a toy or a climbing aid.
Make sure that nobody stands on the head or
foot sections of the article.
• The article can also be used as a transport
aid, although it is not designed for transpor-
ting people!

Assembly

Footrest frame assembly
Note: keep the lounger folded while assem-
bling the footrest frame.
1. Remove the cable binders and the packaging
material.
2. Pull the inside rod (1b) out of the main frame
(1a).
3. Insert the narrow end of the inside rods into
the end of the footrest frame (2) until the
holes are directly above one another.
4. Fix the inside rods and the footrest frame
using the screws (6).
5. Insert the footrest frame into the main frame
with the bracket facing downwards.
6. Screw the cross bar (1c) to the footrest frame.
Note: make sure that the bracket on the footrest
frame is facing downwards.
GB/IE 9