Time And Alarm Function - Silvercrest KH 2021 Instrucciones De Uso

Time and alarm function

The appliance can switch itself on under timed control, e.g. as an alarm
function. The requirements are that the clock is correctly adjusted, an alarm
time is programmed in and the alarm function is switched on. Additionally,
a radio station should be selected and a sufficiently loud volume level be set.
Notice: To adjust the time and alarm settings the appliance must be
switched off.
a) Setting the clock
• To set the hour indicator, press and hold the button "TIME SET"
at the same time, press the button "HOUR"
• To set the minute indicator, press and hold the button "TIME SET"
at the same time, press the button "MIN"
b) Programming the alarm time
• To set the hour indicator, press and hold the button "AL.SET"
at the same time, press the button "HOUR"
• To set the minute indicator, press and hold the button "AL.SET"
at the same time, press the button "MIN"
c) To switch the alarm function on or off
• Press the button "AL.ON/OFF"
In the display
• Press again on the button "AL. ON/OFF"
off. The clock symbol disappears from the display
When everything is programmed as described, the appliance switches itself
on automatically at the programmed alarm time.
• Press the button "AL. ON/OFF"
"POWER OFF"
The alarm function remains activated.
´
a clock symbol appears to serve as a check.
¶
to switch the radio off.
¹
.
¸
.
¹
.
¸
.
º
to switch the alarm function on.
º
to switch the alarm function
º
and subsequently the button
- 44 -
µ
and,
µ
¾
and,
¾
and,
´
.
and,