AudioSonic TXCD-1530 Manual De Instrucciones página 11

• This unit also has a built-in sd-card socket which can accept and play mp3 files
stored on standard "sd" type flash memory cards (of maximum capacity = 1 gb)
which are commonly available.
• To utilize this facility, first insert either a usb-drive or a sd-card into the correct slot
(port) on the front of the unit as shown below:
• Press the function key repeatedly until the display shows "card-usb".
• After about 5-10 seconds the display will indicate the number of mp3 songs found
on the usb-drive or sd-card, and also the number of folders on the device.
• Press the folder key repeatedly to select the desired folder number.
USB-DRIVE
• Press next or back to skip forward or backwards to select the desired mp3 file in
the selected folder.
• Press play to start play back of the selected song.
• All functions for usb-drive & sd-card mp3 playback are exactly the same as in cd-
mp3 mode (as previously described).
NUMBER OF
MP-3 SONGS
073
ON THE DEVICE
VOLUME
If a usb-drive & a sd-card are simultaneously inserted into both slots, the unit will
automatically read the sd-card first and allow playback of the contents of the sd-
card as usual. in such a case, to select the usb-drive, press and hold the "stop/ usb/
sd" key for 2 seconds to switch from sd-card to usb-drive.
• To switch back to sd-card, press and hold the "stop/ usb/ sd" key for 2 seconds again.
SD-CARD
NUMBER OF FOLDERS
09
(ALBUM) ON THE DEVICE
STOP
Note:
Although this product is fully compatible with usb 1.1 & 2.0 standards, a small
percentage (about 5%) of usb flash drives might not be readable, due to those usb-
drive manufacturers non-compliance with the full (official) usb 1.1 /2.0 standards.
the reading time for a usb-drive or sd-card varies depending on the speed of the
memory device and the number of songs and folders. in some cases the reading time
maybe as long as 60 seconds.
Important
always switch off the unit or change mode to "cd" or "radio"before removing a usb
flash drive or sd-card, to prevent damage to your usb device or memory card.
TEXT DISPLAY MODE (ID3 DISPLAY)
• This unit is capable of displaying the "text information" (id3 tag) of an mp3 song
on the lcd display.
• To switch on this function, simply press & hold the find key for 3 seconds.
• To switch back to normal display mode (to display track number, etc.), press & hold
the find key again for 3 seconds.
Finding (searching) mp3 songs by song name (for cd-mp3 only)
• At stop or play modes, press find keyonce.
• The "find" symbol will "flash" in the display, and the letter "a" will be shown. this is
the "search alphabet".
• Press next or back keys to advance the "search alphabet" ( ) to select the desired
search alphabet.
• At every selected "search alphabet" the lower part of the display will show the
name of the first song beginning with that selected alphabet, on the disc.
Example:
• With any selected alphabet, there might be several songs on the disc (which
begin with the same alphabet). to search for all songs beginning with a particular
alphabet, press and "hold" the next or back keys (for 2 seconds) until the "find"
stops flashing in the display.
Instruction Manual EN
11