AudioSonic TXCD-1530 Manual De Instrucciones página 8

9. Finally the unit will return to the normal display, except that the symbol will be
shown, to indicate that you have programmed a power on/off alarm setting.
10. In case you wish to disable the timer, press timer & the symbol disappears.
Note : The automatic power on/off timer will switch on the unit as if you have
manually pressed the "power" key. if you have selected "wake to radio", the exact
preset radio band & station will become activated when power switches on.
Automatic power off sleep function
• This set has a special sleep timer function which can automatically switch off the
unit. this is useful for sleeping to music at night.
• At any time while the unit is operating (cd player or radio), press sleep key
repeatedly to choose the automatic power off time.
(*off means sleep timer is deactivated)
ELECTRONIC VOLUME CONTROL
• This unit uses an electronic volume control (push button type) .
• To increase or decrease the loudness of unit, press the volume up (vol+) or volume
down (vol-) keys respectively.
• Release the key when volume level is at the desired loudness
• Sometimes, especially during listening to the radio, you may notice a "click-click-
click" (repeating) sound when you are increasing or decreasing the volume. this is
a normal condition & the sound will disappear when you release the volume key
(when you reach the desired volume level).
MUSIC EQUALIZER
Press "EQ" key repeatedly to choose the desired sound effect according to the music
you are listening to : (*pass means equalizer is "by-passed" or "OFF")
8
Instruction Manual
OPERATION OF RADIO
• Press the "ON/OFF" key once to switch on the unit.
• Press the tuner key to select the desired radio band.
• For mw (am) stations, rotate or reposition the set to improve radio reception.
• To improve fm-radio reception, fully extend the fm-antenna wire and adjust it's
position.
• Use the "m/s" key (on remote control) to select the desired mode (fm mono/
stereo). in some cases, where reception is poor, it may be advisable to select
"mono" mode, to improve clarity of the radio signal.
Manual frequency adjustment (scan mode)
• Press (and immediately release) the next key or back key to "scan" (manually
adjust) the radio frequency "up" or "down" by 1-step at a time.
• The radio digital display will indicate the exact frequency at each step's position.
• When a desired frequency or station is reached. it can be saved into one of the
"memory" positions. (see "radio memory" section).
Automatic frequency adjustment (seek mode)
• Press and hold (for 2 seconds) the next or back keys
• To "seek" (automatically adjust) the radio frequency "up" or "down" to the next
available radio station.
• The radio digital display will indicate the exact frequency of the next station that
is found.
• When a desired station is reached. it can be saved into one of the "memory"
positions. (see "radio memory" section).
FM antenna
For best fm reception: fully extend the fm wire antenna or connect the external serial
to the 75 ohm socket at the back of the unit.
Radio memory (station preset memory storage)
• At any time, the currently displayed station or frequency can be stored into one of
the memory position.