Remote Control; Power Supply; Memory Back-Up - AudioSonic TXCD-1530 Manual De Instrucciones

REMOTE CONTROL

1. On/ off button
2. Find/ m/s key
3. Timer key
4. EQ key
5. Sleep key
6. Memory down key
7. Band key
8. Intro key
9. Function key
10. Repeat key
11. Memory up key
12. Direct keys (number keys)
13. Mute key
14. Memory/ Program key
15. CD play/ Pause key
16. CD next/ tune up key
17. CD back/ tune down key
18. CD stop key
19. Volume up key
20. Volume down key
6
Instruction Manual
1
2 14
3 15
4 16
5 17
6 18
7
8 19
9
10
20
11
12
13

POWER SUPPLY

• This set works on normal household ac-power.
• Make sure the set voltage of the unit matches your local voltage.
• Insert the plug of the ac-cord into a wall outlet with ac-power.
• Press the ON/OFF key to switch "ON" the unit.
IMPORTANT : how to tell if power is "ON" ?
when the power is "ON" the entire digital display will be lit up with a "blue"
back-light. this indicates the hi-fi is switched "ON".
• This unit is designed to operate without ever being totally powered "OFF". it will
either be "ON" or "standby mode".
• In standby mode, the blue back-light of the digital display will be switched off but
the display will show the current time (clock function).
• When in standby mode, you can use the power switch (on remote control or on
front panel of the main unit) to switch "ON" the unit.
• To conserve electricity, please switch the unit to "standby mode" when not
listening to radio or cd music.

MEMORY BACK-UP

• Open the battery door at the rear of unit.
• Insert 2 pcs "aa-cell" (um-3/lr6 type) batteries in the battery compartment. these 2
batteries are for backup of the "real time clock" and "radio memory preset stations
during brief power outages". please observe the correct polarities or the memory
will not be properly maintained.