REMOTE
CONTROL
WIRING SCHEMATIC DIAGRAM FOR REMOTE CONTROL INSTALLATION DIAGRAM OF RECEIVER
Black
Light live-wire
Blue
Light neutral-wire
Pink
To Motor wire
Grey
To Motor wire
Red
To Motor wire
V
Fan
220-240
40W max
140W max
Adopt RF wireless digit emission technique, biunique controlled, coincident code rate is less than one millionth.
(REMOTE CONTROL and receiver must be sent back to factory for maintenance if damaged)
Receiver can be controlled by any angles of the REMOTE CONTROL in prescriptive space, unrestricted by direction. With
the memory function, the controller can save the status(light and direction) while the supply power OFF and resume to the
original after reload the power supply.
INSTRUCTIONS FOR USE OF EMITTER
1
ON/OFF the fan
2
Direction of the fan (summer/winter mode)
3
Speed of the fan (1 low speed - 6 high speed)
4
Natural wind
5
Timer
6
Anti-theft function
7
Turn down the brightness of the light
8
Turn up the brightness of the light
9
Turn ON the light
10
Turn OFF the light
11
Battery (1,5V AAA x 2 pcs) - Not included
22
Brown
Power supply live-wire
Blue
Power supply neutral-wire
Yellow/Green
Ground wire
Black wire
Antenna wire
Lamp
USER MANUAL
5
7
9
IMH-100 v.01
Receiver
1
2
3
4
6
8
10
11
hofflights.com