Loewe Subwoofer Compact Instrucciones De Manejo página 14

Start-up and settings
Before commencing the start-up and settings, please make sure that all cables
are connected correctly.
Switching the subwoofer on/off
Use the mains switch Power to switch the subwoofer on in position ON
5
and off in position OFF.
Mode with Loewe TV sets
If the subwoofer is connected via the Audio-Link connection, as described on
page 13, the Mode - ON/AUTO
2
the Mode - 2.1/Stereo switch is on the 2.1 position, you no longer need
6
to switch the subwoofer on and off separately. After switching on the subwoofer
for the rst time, it is automatically switched on and off together with the
Loewe TV set.
➠
Register the presence of the subwoofer as described in the instructions for
use of your Loewe TV set under "Operating extra devices" or "External
devices".
Automatic operation with other audio sources
If there is no Audio-Link connection, the Mode - ON/AUTO
the AUTO position and if audio signals are present at the Cinch sockets Line
IN - Right/Subw/Left the subwoofer will switch on automatically. After 10
1
minutes without an audio signal at these sockets, the subwoofer will switch off
automatically.
➠
The subwoofer can switch on automatically if fault signals are present on
the audio lines. In this case, activate the mains switch
➠
The subwoofer can switch off automatically during longer, very quiet pas-
sages. In this case, increase the volume.
Continuous operation with other audio sources
If you wish to operate the subwoofer in continuous mode, switch the Mode -
ON/AUTO switch to the ON position. Then switch the subwoofer on or off
7
with the mains switch Power .
5
Stereo mode
Move the Mode - 2.1/Stereo switch
are only feeding the audio signals in at the Cinch sockets Line IN - Right/Left.
The bass manager integrated in the subwoofer then automatically directs
1
the bass components contained in the stereo signals to the subwoofer channel.
- 14
switch is in the AUTO position and
7
switch is at
7
.
5
switch to the Stereo position if you
6
2.1 Mode
Move the Mode - 2.1/Stereo switch
the audio signals in at the Cinch sockets Line IN - Right/Subw/Left
Wireless
*
Use a sharp object (e.g. paper clip) and press brie y on the button in the open-
ing to move the optional Module Wireless Audio Link in Coupling mode.
8
Setting the crossover frequency
The Crossover Frequency knob
9
frequency for the bass playback - depending on which speakers you have con-
nected - between 50 Hz and 350 Hz.
As described on page 13, for Loewe audio systems the knob should be set
to 350 Hz because the crossover frequency is set to this in the Loewe audio
sources (TV set).
Mode 2.1
Crossover
20 50 350
Setting the equalizer
The Equalizer knob gives you the option of setting a reduction or increase
10
in the lowest frequency ranges (20 Hz - 50 Hz) for the bass playback.
• If the subwoofer is near the corner of the room, turn the Equalizer knob
more towards -3 dB.
• If the subwoofer is near a wall, then turn the Equalizer knob more to the
middle position.
• If the subwoofer is freestanding in the room, turn the Equalizer knob
more towards +3 dB.
Bass intensity
You can use the Bass Intensity control
you want it.
* Please contact your dealer regarding availability
switch to the 2.1 if you are feeding
6
1
gives you the option to set the limit
Mode Stereo
Crossover
20 kHz 50 200 350
to set the basic bass volume to how
11
.
20 kHz
10
10