Night Light; Cleaning And Maintenance - Topcom D’LITE MAGIC Manual De Usuario

5.2 LED light functions
When the light is on, press the MODE button to change to different modes:
• Press once for bright light.
• Press twice for medium light.
• Press tree times for low light.
If you turn off the light, the selected light mode will remain.
5.3

Night Light

The night light function can give a comfortable feeling in a dark room with a
very low consumption of energy.
When you set the lamp into the charger, only the blue charging LED will burn.
While charging,
• Press the ON/OFF-button to activate the Night Light function.
• Press the MODE-button to select the desired brightness (steps).
• Press the ON/OFF button to deactivate the Night Light.
5.4 SOS
• Press and hold the MODE-button for 3 seconds to activate the SOS function.
• The LED's will blink 3 x quickly, 3 x slow, 3 x quickly.
• Press the MODE-button again to stop the SOS function.
5.5 Emergency wake-up
When the lamp is charging, the LED-Light will automatically turn on if there is a main AC
power interruption.
• The first hour, it will light with the full brightness.
• The second hour, the brightness will drop, but the lamp will burn for another hour.
• After the second hour, the LED's will blink until the battery power drains to its lowest
limit.
• When the main AC power resumes, the emergency light will turn off and charging
restarts.
5.6 Colour caps
To change the room ambient, one of the 3 color caps can be added on the product.
These caps are intended to be used with the night light function.
Don't drop the flashlight when one of the caps is installed as they may get damaged.
6

Cleaning and maintenance

• To clean the unit, wipe with a soft cloth dampened with water. Don't use a cleaner or
solvents on the unit; they can damage the case and leak inside, causing permanent
damage.
• Battery contacts may be wiped with a dry lint-free cloth.
Topcom D'lite Magic