Safety Recommendations - Steinberg SBS-ML 100 Manual De Instrucciones

USER MANUAL
EN
PRODUCT NAME: LIFT MAGNETIC STEEL LIFTER
MODEL: SBS-ML 1000 | SBS-ML 100 | SBS-ML 300 | SBS-ML 500 | SBS-ML 600; SBS-ML 800
SBS-ML 2000 | SBS-ML 3000
MANUFACTURER NAME: EXPONDO POLSKA SP. Z O.O. SP. K.
MANUFACTURER ADDRESS: UL. DEKORACYJNA 3, 65-155 ZIELONA GÓRA | POLAND, EU
expondo.de
I. SAFETY RECOMMENDATIONS
Operation manual must be reviewed.
CE
This machine conforms with CE declaration.
This machine features the source of a magnetic field.
This machine generates a magnetic field which may interfere with medical devices such as metallic
implants or pacemakers. Never use the machine or approach the machine when it runs if not
permitted by the manufacturer of the medical devices or a physician.
Note! Make sure bystanders remain in safe distance from the work place.
Note! Be aware of suspended loads!
Attention! Danger of accident.
Attention! Danger of hand being crushed.
Attention! Wear protective helmet.
Attention! Wear protective footwear
Attention! Wear protective gloves.
The original operation manual is in German. Other language versions are translations from German.
1. Before commencing work make sure to thoroughly read and understand this operation manual! All safety recommen-
dations must be followed to avoid damages occurring as the result of using the equipment contrary to its intended
use!
2. This operation manual must be retained for future reference. If the machine is transferred to third persons this ope-
ration manual must also be handed over with the machine.
3. If the machine is operated contrary to its intended use or in case of improper handling of the machine, producer
liability for any resulting damage is excluded.
4. The machine can be operated by physically fit persons who are able to handle the machine and properly trained and
who reviewed this operating manual and received training in occupational health and safety.
5. The machine is not designed to be handled by persons (including children) with limited mental and sensory functions
or persons lacking relevant experience and/or knowledge unless they are supervised by a person responsible for
their safety or they have received instructions on how to operate the machine.
II. SAFE OPERATION PRINCIPLES / WARNINGS
1. Review this operation manual and the safety recommendations prior to each use of the machine.
2. Before each use make sure to check if parts are not worn or damaged to the extent where proper functioning of
the machine impossible. This machine must not be operated if its parts are worn or damaged in a way that prevents
proper operation.
3. If the machine has been overloaded or subject to strong shock/vibrations, it must be inspected by a qualified service
technician before commencing any work on the machine.
4. This machine must not be operated if it is damaged, worn or if it does not work properly. If such condition occurs the
machine must be handed over to an authorised service center for inspection and repair.
5. Comprehensive periodic inspections of the machine must be carried out and worn/damaged parts must be replaced
on an on-going basis.
6. Do not dismount or replace any parts of the machine.
7. Use only original replacement parts, as recommended by the manufacturer.
8. This machine may only be handled by persons properly trained in safety regulations and physically able to operate the
machine.
9. Do not overload the machine with a load exceeding the maximum admissible load.
10. Do not hit the magnetic lifter or the load.
11. Do not walk or stay under a hanging load (and in its direct vicinity).
12. Third parties must be warned about operation of the machine and stay at a safe distance.
13. Do not lift people or animals using this machine.
14. Do not lift the load using the machine over people or animals.
9
REV. 18.04.2017
EN