Descargar Imprimir esta página

burgbad Oteo M1122 Instrucciones De Montaje página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

MONTAGEHINWEISE / ASSEMBLY INSTRUCTIONS
D
Stockschrauben anzubringen. Unser Werkskundendienst nimmt keine Bohrungen vor.
nicht enthalten!
ablegen.
Zeitraum besonders vorsichtig behandeln und nicht reinigen oder abwischen (kein Mikrofasertuch).
8. Die Montagemaße beziehen sich auf Oberkante fertiger Fußboden. Alle Maße in mm.
GB
essential that you read and make note of these before installing the furniture. We can accept no responsibility for damages that
are the result of failure to adhere to these instructions.
1. Our products may only be installed by a specialist craftsman for sanitary facilities or by another competent person.
all preparations for installation should still be made and the installation rails, hooks and hanger bolts should be attached.
Our factory customer service does not undertake drilling.
situations, special fastenings must be used accordingly. Hanger bolts are not included in the delivery!
6. No drilling dust can be allowed onto the pull-out rails! Furniture should therefore only be hung after drilling, or taken down
again before drilling.
7. The products must be attached at all the installation points provided.
connections, lighting and sockets must be checked.
on the use and loading of the items of furniture and is not a reason for complaint.
11. Please clean the furniture before handover! Remove drilling dust, labels and adhesive residues!
12. Check the water and siphon connections for tightness!
washbasin with the washbasin substructure in order to prevent water penetration. Use only neutrally bonded (solvent-free)
silicon.
14. The function, handling and care of the products must be explained to the owner.
2

Publicidad

loading