SOLAC CP7395 Instrucciones De Uso página 15

CLEANING
REMOVE THE GUIDE COMB. .
• Wipe the outside with a dry cloth.
• When changing the head, clean it and the inside of the appliance using the
cleaning brush (17)
CLEANING THE BLADES FIG. 9
• With the blades installed on the appliance, switch on the cleaning roller (13)
on the base (11) by pressing the cleaning switch (12)
• Place the appliance and the blade head you want to clean (4 or 5) in the
cleaning roller (13).
• The cut hair you clean with the roller will fall into the tray (14). Open the
drawer and clean it by emptying its contents.
MAINTENANCE:
FREQUENCY
• The barber's blade (5) is made from ceramic and therefore does not require
frequent maintenance. In any case, we recommend that you lubricate it at
least once a month.
• We recommend that you lubricate the detail blade (6) before and after each
use
LUBRICATING SPONGE FIG. 10
• To lubricate the blades, this complete kit has a lubricating sponge (15) in
the charging base (11).
• Add 6 drops of lubricating oil (18) to the sponge (15) in the charging base
(11). To do so, remove the sponge's protection and replace it afterwards.
Perform this operation every three months.
USE
• When lubricating the blades, remove the guide combs (7) and the protector
(8) if they are installed. Remove the sponge protector (15) and insert the
blades in the sponge, pinching it softly (Fig. 11)
Cortapelos CP7395 15
15
26/6/06, 12:12:41