Removing The Blades - SOLAC CP7395 Instrucciones De Uso

REMOVING THE BLADES

• To remove the blades (5 and 6) from the appliance (1), push the blades
upwards with your thumb from the front (Fig. 4)
TRIMMING BEARDS, GOATEES AND MOUSTACHES
• Install the barber's blade (5) inserting the hook of the blade in the case of
the appliance. Press until you hear a click (Fig. 5)
• Next, install the required guide comb according to the desired cutting
length (Fig. 7). We recommend that you start off with one of the longest
positions and change it as required.
• Begin under the chin and move upwards and outwards. (Fig. 12). To trim a
moustache, comb it downwards using the comb accessory (16) and trim it.
(Fig. 13)
SHAVING
• Install the shaving head (10), inserting the hook of the head in the case of
the appliance. Press until you hear a click (Fig. 5)
• Next, switch on the appliance (Fig. 6) placing it in the "I" position, and shave
the desired areas. You can use this accessory to go over the contour of the
beard and achieve an even result and a well-defined beard.
TRIMMING SIDEBURNS AND EYEBROWS
• Install the detail blade (6) inserting the hook of the blade in the case of the
appliance. Press until you hear a click (Fig. 5)
• Next, install the required guide comb according to the desired cutting
length (Fig. 7). We recommend that you start off with one of the longest
positions and change it as required.
• First, comb the sideburns downwards using the comb (16) and then trim
them (Fig. 14)
• For the eyebrows, comb them upwards using the comb (16) and then trim
them (Fig. 15)
NOSTRILS AND EARS
• Install the head for nostrils and ears (9), inserting the hook of the head in
the case of the appliance. Press until you hear a click (Fig. 5)
• Next, switch on the appliance (Fig. 6) placing it in the "I" position, and cut
the hair in these parts (Fig. 16).
• Do not insert the point more than 5 millimetres into the ear, since you might
damage the eardrum.
14
Cortapelos CP7395 14 26/6/06, 12:12:40