User Programming Functions; Auto-Off - B3C 9860 Serie Manual De Instrucciones

c - Press the
Check alarm type
d - Press the
0 - Inside type
count falls inside the set range.
1 - Outside type
tal count falls outside the set range.
e - Press the
f - Press the
g - Turn off the scale after all USER PROGRAMMING FUNCTIONS are set and
restart for use.

USER PROGRAMMING FUNCTIONS

9
9.1 - FONCTION AUTO-OFF
a - Turn on the scale.
b - Press
to zero to enter into USER PROGRAMMING FUNCTION MODE.
Auto.shut off time (0-2-5-8)
c - Press the
- 0 - No extinction.
- 2, 5 8
ou - Exctinction beyond 2, 5 or 8 min of not functioning.
d - Press the
e - Press the
f - To valid modification, turn off the scale. Then turn on the scale.
key, select the PASS function.
Alarm
key, to revolve the system-preset check alarm type.
The alarm sounds beeps only when either total weight or total
The alarm sounds beeps only when either total weight or to-
key to determine and return to normal counting mode.
key to confirm and move to next.
key 4 times one after another during counting down (self-check)
Auto shut Off
key to select the system-preset time span (0,2,5,8).
key to accept and return to normal counting mode.
key to confirm and move to next..
ENGLISH
31