Network" Settings - Gorgy Timing RADIO TIMING CP09 Guia Del Usuario

In the event of a power failure, the relays will open regardless of the
settings on this page.
Information on the current state of the relay is also available on this page:
► Its activation state, which shows whether an event associated with the relay is in progress
► Its physical state, which shows whether it is currently in contact or open
Examples:
► If no event is defined in Mozilla Sunbird and the relay is in "Contact open" mode, the
state will be: relay "OFF, state: contact".
► If an event associated with this relay is in progress and the relay is in "Contact closed"
mode, the state will be: relay "ON, state: contact".
If an event associated with this relay is in progress and the relay is in "Contact open"
►
mode, the state will be: relay "ON, state: open".
► If the "Clear all calendars" box is checked when you click on OK, all the events sche-
duled for triggering the relays will be cleared.

5.5. "NETWORK" SETTINGS

This page allows you to configure the network to which the
choose automatic setup, or specify an IP address, a subnet mask and a default gateway.
Once you confirm the configuration, the
settings.
The Web interface will then become inaccessible for about 1 minute.
100
RTCP09
RTCP09 will reboot automatically to apply the new
is connected. You can
MDE-RTCP09-3060V2.2