Setting The Ip Address; Activating The Outputs - Gorgy Timing RADIO TIMING CP09 Guia Del Usuario

4.4. SETTING THE IP ADDRESS

The first screen asks you whether you want
to set the RTCP09's IP address manually.
If you want to set the RTCP09's IP address,
the setting screen is displayed.
The first line is used to enter the IP address,
the second the subnet mask and the last the
default gateway

4.5. ACTIVATING THE OUTPUTS

This screen allows you to activate all the
outputs available on the RTCP09.
The last two lines are used to specify the
time zone and the daylight saving time po-
licy (summer / winter) that will be applied to
the output time.
► Example: For France, if the local time is
entered, the last two fields must take the
following values:
► UTC : + 01H00
► DST : Europe
This screen displays whether the RTCP09
has a pulse output. It can be used to indi-
cate the time on the pulse receiving clocks
so that the RTCP09
tect the number of pulses to send.
MDE-RTCP09-3060V2.2
can automatically de-
95