Snmp Parameters; Updating The Firmware - Gorgy Timing RADIO TIMING CP09 Guia Del Usuario

You can enter the MD5 keys used by the NTP client or server modules in the lower part of
the page.

5.8. SNMP PARAMETERS

Here you can enter information specific to the SNMP protocol for monitoring the
as well as the addresses to which the alarms (traps) will be sent.

5.9. UPDATING THE FIRMWARE

Before starting the update, it is preferable to back up the relays
programming calendars if the
BACKING UP CALENDARS).
Depending on the new features, the relay programs may be lost.
MDE-RTCP09-3060V2.2
RTCP09 has them (see Section 6.6.
RTCP09
109