PRELIMINARY OPERATIONS
Overview of the Components
1 Grill grid
2 Heating element
3 Grill tray
4 Plastic border
5 Plastic net
6 Screw
7 Supporting steel tube
8 Plastic connector
9 Screw
10 Supporting steel tube
11 Middle grid
12 Butterfly nut
13 Plastic tube foot
Please see illustration 1.
• First remove the heating element(2).
• Remove any packaging material that may be
present.
• Clean the grill grid (1) and Grill Tray (3) with a
moist cloth.
• Turn the Plastic border(4) upside down.
• Attach the Plastic net(5)to the bottom of
Plastic border(4)
• Fix the supporting steel tube(7) and middle
grid(11) with screw(9)and butterfly nut.
• Put up the main body of baking tray with
supporting steel tube(7).
• Assemble the grill as shown in illustration 1.
• Pour 1.5 litres of cold water into the grill tray up
to the "MAX" Mark.
Before using for the first time, fill the grill tray with water
and use it for 15 minuters to remove the protective film
from the heating coil. Select the MAX thermostat
position. The presence of smoke is normale. Make sure
that a sufficient level of ventilation is available.
Preheat the device before use for approximately 5
minuters.
USAGE
• Insert the plug in a duly installed 230V/50Hz
protective contact socket.
• Fill in 1.5 l of cold water up to the "MAX"mark in
the trough.
• Set the thermostat for the desired use: a low or
medium temperature for warming or cooling,
MAX. for rapid cooking and grilling. The LED
shuts off when the desired temperature is reached.
• Lay the food directly on the grill grid. Never use plates, trays or aluminum foil beneath the
food. The grilling time depends on the thickness of the food and the set temperature. Thick
fig.1