Mellerware Tasty! Modo De Empleo página 21

Pulse function (4)
Pressing this button activates the
–
Pulse function, which produces a
short burst at maximum speed. This
function is ideal for processing hard
foods or large quantities.
If working cold: Press the button
–
to process the mixture for a few
seconds. Releasing the button
deactivates this function.
If working hot: for safety reasons,
–
this function is not available.
Heat function (5)
This button is used to maintain a
–
certain temperature. The default
value is 37 °C.
When this button is pressed, the
–
appliance starts to keep the
temperature of the container at
37 °C.
To change the default
–
temperature, press button (3), use
the selector knob to set the desired
temperature and desired time.
Knead function (6)
Pressing this button activates the
–
function to knead dough.
The default speed is 3 and the
–
default time is 2 minutes.
Put flour and water in the container
–
and press the knead button (6).
When this button is pressed, a
–
beep will sound, and the appliance
will start kneading.
After the time has elapsed, the
–
Play/Pause button will flash. 5
seconds later, the button will stop
flashing if no action is taken. All
settings will be erased.
Play/Pause (7)
This button starts/stops the
–
process. Press this button to
–
stop the appliance during the
operation. Press this button again
to continue the process.
–
Press and hold the button for more
than 3 seconds to stop the process
completely and enter standby
mode. In this case, all of the
settings will be erased.
Selector knob (8)
This control knob is used to select
– –
the desired temperature, speed
and time.
Speed setting (9)
Pressing this button activates the
–
speed selection function (1-12).
The speed indicator (1) will flash. To
–
select the speed, turn the selector
knob (8) to the desired speed.
EN ES