Environmental Protection; Personal Safety; Machine Data - Carat BS-1252 Instrucciones De Manejo

ENGLISCH – ORIGINAL INSTRUCTIONS
INDEX
1. PERSONAL SAFETY
2. MACHINE DATA
3. ASSEMBLY INSTRUCTIONS
4. OPERATION INSTRUCTIONS
5. SERVICE & MAINTENANCE
6. SAFETY WARNINGS
7. GUARANTEE
ENVIRONMENTAL PROTECTION
Only for EU countries
Do not dispose of electric tools with household
waste material! In observance of European Directive
2002/96/EC on waste electrical an electronic
equipment (WEEE) and its implementation in
accordance with national law, electric tools that have
reached the end of their lifetime must be collected
separately and returned to an environmentally
compatible recycling facility.
RoHs
Carat supports the European Union's efforts to remove harmful
chemicals from consumer electronics. In observance of Directive
2002/95/EC of the European Parliament and the Council of the
European Union regarding the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS),
Carat will provide fully compliant products in all regions where the
directive will be enforced by the 1 July 2006 deadline.
1. PERSONAL SAFETY
Read all operating and safety instructions before
using the machine. Follow the instructions
strictly for your own safety.
Use the following personal protective equipment when using the
power tool.
2. MACHINE DATA
Technical Data
Type
Rated power input
Protection class
No‐load speed
Thread of spindle
Arbor diameter
Diamond grinding tool diameter
Total length
Weight according to EPTA‐Procedure 01/2003
Due to our continuing program of product development and
technical improvement, the specifications herein are subject to
change without notice.
Intended Use
The machine is intended for dry grinding, deburring and smoothing
mainly mineral materials (such as e.g., concrete, stone, marble and
pavement/plaster flooring). It is also suitable for removing protective
coating and adhesive residue. The machine should be used
09
09
10
10
11
11
13
BS‐1252
1400W
2 / II
‐1
10.000 min
M14
Ø 22,2mm (7/8")
Ø 125 mm
360 mm
3,2 kg
exclusively in conjunction with a dust category M vacuum cleaner,
suitable for extracting dust and gravel.
Power supply
The tool should be connected only to a power supply of the same
voltage as indicated on the nameplate, and can only be operated on
single‐phase AC supply. The tool is double‐insulated in accordance
with European Standard and can, therefore be used from non‐
grounded sockets.
Dust extraction
Dust released when processing (grinding of minerals) can be harmful
to one's health. Touching or breathing‐in the dusts can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
 To achieve a high degree of dust extraction, use a dust category M
vacuum cleaner for mineral dust together with this power tool.
 Provide good ventilation of the working place.
 It is recommended to wear a FFP2 filter class respirator
Observe the relevant regulations in your country for the materials to
be worked.
Please observe the following notes in order to reduce the dust
emissions occurring while working.
 Only use combinations of diamond grinding tools, concrete
grinders with mounted guard and extraction hood as well as dust
category M vacuum cleaners that are recommended by Carat.
Other combinations can lead to insufficient dust collection and
separation.
 Observe the operating instructions of the vacuum cleaner for
maintenance and cleaning of the vacuum cleaner, including the
filter. Empty dust collection containers immediately once full.
Clean the filters of the vacuum cleaner regularly and always insert
the filters completely into the vacuum cleaner.
 Only use vacuum hoses as intended by Carat. Do not manipulate
the vacuum hose. When rocks or chunks of stone/masonry are
drawn into the vacuum hose, cease work and clean the vacuum
hose immediately. Prevent the vacuum hose from being bent or
creased.
 Use the concrete grinder only as intended for.
 Observe the general requirements for construction sites.
 Provide for good ventilation.
 Ensure that the work area is free of obstructions. For longer
grinding jobs, the vacuum cleaner must be able to move along
freely and at the right time.
 Wear hearing protection, protective goggles, a dust mask and
gloves as required. As dust mask, use at least a particle‐filtering
class FFP 2 half‐mask.
 Use a suitable vacuum cleaner for cleaning the workplace. Prevent
settled dust from being swirled up by sweeping.
Noise level
Typically the A‐weighted noise levels of the product are: Sound
pressure level 88 dB(A); Sound power level 99 dB(A). Uncertainty K=3
dB.
WEAR HEARING PROTECTION!
Measured values determined according to EN 60745.
Vibration
Vibration total values determined according to EN 60745:
Vibration emission value a = 5 m/s
h
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
2 2
, Uncertainty K < 1.5 m/s .
9