Cleaning And Maintenance; Cleaning The Exterior - BFT Espas30 I Manual De Uso

8 - CLEANING AND MAINTENANCE

The Espas30 parking system has been designed and built to work for many years
without any faults provided the few required maintenance operations are carried
out carefully and frequently.
Cleaning the printing unit
It is advisable to keep the printing unit as clean as possible since it is the core of the
station; follow instructions carefully and carry out maintenance weekly.
1 - Lift the print head by pressing the blue lever then remove the paper from the
back of the printer.
2 - Remove the printer, clean it and refit it inside the station following the instruc-
tions in chapter 7 - PAPER REPLACEMENT.
WARNING! Clean the printing unit after disconnecting the electrical supply to
the station
Removal of a jammed ticket
To remove a jammed ticket:
1 - Remove the printer and the jammed ticket, clean it and refit it inside the station
following the instructions in chapter 7 - PAPER REPLACEMENT..

Cleaning the exterior

Only clean the station with water and a small amount of mild detergent, and avoid
doing so while the sun is beating down.
Espas30 I - 29