Confi Guration Of The Audio Inputs - Optimus UMX-02/0 Manual De Instrucciones

ENGLISH
3.2.2. Confi guration of the Audio Inputs
Having selected the option Audio Inputs from the Confi gurations menu, select the input that you wish
to confi gure using the navigation keys.
Press MENU/OK.
Select the various options from the menu using the navigation keys. Once an option has been selected,
open it using the MENU/OK key. To exit a menu press the CANCEL key.
• I. Input Number
Also known as Logical Input.
Using the numeric keypad,
enter a number between 1
and 9999
This number will be the one that identifi es this
Eng
input on the various menus.
here cannot be more than one logical input with
the same number.
Press the MENU/OK key to save the data.
• II. Label
The information on this label
must be completed from the
control computer. The text
that it contains is merely for
information purposes.
• III. Pro / Pri
Program: the signal applied
to this input
through the audio outputs
with which this program
input has been associated.
Priority: the signal applied to this input will leave
through the associated outputs when the priority
contact is activated.
Using the navigation keys, position yourself on
Program or Priority and press key
The √ sign indicates the current confi guration.
Press the MENU/OK key to save the data.
60
UMX-02/0
H a r d w a r e i n p u t 0 1 0 1
L o g i c a l i n p u t ?
_
0 1 0 3 _ i 3
L a b e l
S M P 9 4 R S
•
0 1 0 3 _ i 3
will leave
P r o g r a m
√ P r i o r i t y
5
to select.
• IV. Associated Outputs
These are the audio outputs
through which the signal
applied to this input will
leave when the priority
contact is activated.
To associate an output, its logical output number
must be entered using the numeric keypad.
It is also possible to associate Groups. To do so, the
number of the Group that it is wished to associate
must be entered using the numeric keypad. The
groups must fi rst have been created by means of
the Groups menu (see section II. Confi guration
/ 3.6. Groups).
To add other zones or groups, press key
then the name of the zone or group that it is
wished to add (maximum 100 outputs and/or
groups associated with an input).
• V. Priority Level
Priority level of each input confi gured as Priority
with respect to the others.
There are 64 different priority levels.
Maximum priority = 0
Minimum priority = 63
By default a priority of 5 is established.
• VI. Gong (only for the UMX-EGC
card inputs)
This option is used to confi gure the gong for the
inputs confi gured as priority.
Off: Deactivates the pre-announcement.
Tones: Activates the gong of the card.
•
0 1 0 3 _ i 3
A s s o c . O u t . / G r o u p s
1 + 0 1 + 0 7 + 4 2 + 3 _
5
and
UMX-02/0 v1.0