Publicidad
Idiomas disponibles
Idiomas disponibles
BC 3655
ASSEMBLE THE HEATING ELEMENTS:
1、 Heating element
2、 Handle
3、 Grill rack
BEFORE USING FOR THE FIRST TIME
A. Remove any packaging materials from the appliance.
B. Clean the grill rack and its accessories.
C. The barbecue assembly:
i.
Use two screws joint the grill body and the control seat. Note: the plastic pole must be
upturned. Insert the heating element into the grill rack (as the chart)
ii.
Place the heating element with the grill rack into the grill pan. Insert the control box into
the grill pan. Guarantee the plastic pole of the grill pan insert the hole under the control
box, and assemble right.
iii.
Place the grill on the table. Ensure that the grill is placed in a safe and stable position. The
power cord should be placed suitably in order that no one is likely to trip over it.
iv.
Let the grill heat up for a moment without any food on the rack. This will reduce the smell
when first switching on a new grill (a slight smell and a little smoke may be emitted-
ensure sufficient ventilation).
GRILL
Fix the heating element; then ensure that the grill rack is placed correctly on the element.
Insert the plug into the mains supply socket.
Then you place the food stuffs on the grill rack.
When grilling is finished, disconnect the grill from the mains supply socket.
Plastic
pole
4、 Tray
5、 Handle support
12
Publicidad
