Makita BO5040 Manual De Instrucciones página 6

Ocultar thumbs Ver también para BO5040:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installing dust bag
011031
Install the dust bag on the tool so that the Makita logo on
the dust bag will be upright (not upside down).
Emptying dust bag
1
003323
When the dust bag is about half full, switch off and
unplug the tool. Remove the dust bag from the tool. Then
remove the dust nozzle from the dust bag after unlocking
the dust nozzle by turning it slightly counterclockwise.
Empty the dust bag by tapping it lightly.
After emptying the dust bag, install the dust nozzle on the
dust bag. Turn the dust nozzle slightly clockwise to lock it
in place. Then install the dust bag on the tool as
described in "Installing dust bag".
1
003326
1. Dust bag
1
1. Dust nozzle
1. Dust nozzle
OPERATION
CAUTION:
Always use the front grip and firmly hold the tool by
front grip and switch handle during operations.
Sanding operation
011083
CAUTION:
Never run the tool without the abrasive disc. You
may seriously damage the pad.
Never force the tool. Excessive pressure may
decrease the sanding efficiency, damage the
abrasive disc or shorten tool life.
Using the tool with the pad edge contacting the
workpiece may damage the pad.
Hold the tool firmly. Turn the tool on and wait until it
attains full speed. Then gently place the tool on the
workpiece surface. Keep the pad flush with the
workpiece and apply slight pressure on the tool.
CAUTION:
The sanding pad rotates clockwise during the loaded
operation, but it may rotate counterclockwise during the
no-load operation.
Polishing operation
For BO5041 only
CAUTION:
Use only a Makita genuine sponge pad, felt pad or
wool pad (optional accessories).
Always operate the tool at low speed to prevent
work surfaces from heating abnormally.
Never force the tool. Excessive pressure may
decrease the polishing efficiency and cause motor
overload, resulting in tool malfunction.
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bo5041

Tabla de contenido