VMB TL - A300 Manual De Instrucciones página 14

Quick Operation Guide
Remove the front telescopic support bars (BA)
by taking out the pins (BU/P1) ,un-extend and
place in the two transport positions located on
the outriggers. Place the outiggers in their
transport houses (B).
5. MAINTENANCE.
5.1 – Periodically check the condition of the
cable. If a cable is torn or broken it should be
replaced immediately. Do not use the lift if the
cable is not perfect. Only use torsion resistant
steel cable DIN 3060.
5.2 – The lift is supplied completely greased
from the factory. Never the less, we
recommend you periodically grease
(depending on amount used) the teeth of the
winch (CD), end point of the handle (RM), bar
(EB) (Fig. 8) and the profile nylon drums.
EB
CD
ATTENTION: Do not grease or lubricate the
break mechanism.
The brake discs have been greased with a
special heat and pressure resistant grease. Do
not use other products.
PRO L IFTS S.L.
EB
RM
Figura 8
ENGLISH
5.3 – All lifts should undergo an annual
technical inspection carried out by an
authorized VMB dealer to check the
certifications and general condition of all the
lift's elements and security systems involved
in the lift's use.
5.4 – Only use original spare parts to guarantee
a continued security level.
The user loses all rights to warranty if any spare
parts other than originals are used or carries
out any modification or alteration to the
towerlift.
5.5 – To request a spare part please indicate
the corresponding code which can be found in
this manual.
6. GUARANTEE.
The warranty period for this lift is 2 years from
the date of purchase.
PRO LIFTS S.L. promises, that from the date
of purchase and during the warranty period to
resolve any faults that may occur produced
through defect material or fabrication.
Damage caused by inproper use, product
modification, terciary manipulation or acciden-
tal fire are not covered by this warranty.
7. CERTIFICATIONS
-
EC Machinery Directive
89/392/ECC and 98/37/ECC
- BGV C1 (GUV-VC1) / BGG 912 (GUV-G912)
v12.03 - Depósito legal y Copyright 2012. Todos los derechos reservados.