Water Connection; Rotor Assembly - Unox ChefTop XC404 Manual De Instrucciones

ENGLISH

4. WATER CONNECTION

It is necessary to place a cut-off valve between the water
system and the appliance.
As required by current laws, the appliance is equipped
with 2 metres of pipe, the respective pipe fitting (3/4")
with non-return valve and mechanical filter.
Before connecting the water pipe to the appliance please
let some water flow to clear the pipe of any obstruc-
tions.
The water used in the appliance must have a pressure
value between 1 and 3 bar and a maximum temperature
of 30°C.

5. ROTOR ASSEMBLY

To assemble the rotor of the washing system inside the
cooking chamber proceed as follows:
• Unscrew the closing cap that you find on the ceiling of
the cooking chamber
• Fix the rotor in the proper hole with the issued pin
(by using a slot screw driver) and place the issued
washer between them
• Replace the closing cap by screwing it with a slot
screw driver.
6. DETERGENT AND RINSE AID
Insert the detergent and rinse aid suction pipes, fitted with
proper sinking weights, into the respective tanks (check
the labels on the back of the washing system box).
Use recommended detergent and rinse aid brands and
models; the use of different products does not grant the
correct washing of the oven cooking chamber and invali-
dates the warranty.
Refer to the supply contacts indicated at the end of this
manual.
UNO X
R
ENGLISH
ENGLISH
7 6