Characteristics Of The Thermosealer - Euronda EUROSEAL 2001 PLUS Manual De Instrucciones

EUROSEAL ® 2001 PLUS
Euroseal 2001 PLUS is the newest electronic thermosealing machine from Euronda, with a continuous
®
cycle and constant temperature which has a guaranteed sealing size of 12 mm., and is available in both
220V or 110 voltage. Euroseal
gn, easy to use and to clean, with rounded contours and fitted with a roll holder which has an overall
dimension that measures the length of the machine. The sterilisation rolls of paper/polypropylene, availa-
ble in 100 or 200 meters, are positioned inside the machine. The new applied technology minimises the
energy consumption by creating shorter sealing times and eliminating the need of cooling times between
every use. It also increases the reliability of the machine, excluding the periodical servicing and repairs.
Euroseal ® 2001 PLUS is built in accordance with the quality standards set by the European Community.
CHARACTERISTIC OF THE THERMOSEALER
Supply voltage
Number of phases
Supply frequency
Power input
Isolation class
Fuses
Range of environmental conditions
in which the unit was designed
to operate
Switch
Weight of the machine
Sealing band
Type of sealing
Sealing area width
Power unit
Roll hanger
Energy consumption
Cooling time
Positioning of the tape during the sealing
Cutting edge
Sealing lever
Design
Colour
Routine maintenance
PART 3
DESCRIPTION
® 2001 PLUS is a machine with a modern, innovative and ergonomic desi-
230 V
1
50 Hz
100 W
1
N° 2 - 5 x 20 - T 4 A
- Indoor use
- Altitude up to 2000 m
- Temperature: +5 ÷ +40°C
- Max relative humidity 85%
- Max variation in mains voltage: ±10%
- Installation category (overvoltage category) II
- Pollution level 1
Single-pole
7,4 Kg
12 mm
constant temperature.
310 mm
unigue and autonomous, available for use with either
220V or 110 voltage. Which is not subject to short cir-
cuiting. It is easy to repair (in the rare case of breakage),
and is built according to EC safety standards.
has a hidden support
It is from 30% to 50% less than the standard impulse sealing mac
not needed, between one sealing and another
During the sealing there is no difference between
placing the sealing tape with the film above or below
practical, safe, functional and easy to use
ergonomic, handle with a light and delicate movement
ergonomic and rounded
RAL 9002, powder painted
not necessary
110 V
1
50/60 Hz
100 W
1
N° 2 - 5 x 20 - F 10 A
9